WEKO3
アイテム
熱処理に伴う炭素鋼の組織変化
https://doi.org/10.57375/00000064
https://doi.org/10.57375/0000006414270f0e-ebb1-4383-b020-f3dbd46c90b9
| 名前 / ファイル | ライセンス | アクション |
|---|---|---|
kiyou4214.pdf (7.9 MB)
|
|
| Item type | 紀要論文 / Departmental Bulletin Paper(1) | |||||
|---|---|---|---|---|---|---|
| 公開日 | 2012-08-01 | |||||
| タイトル | ||||||
| タイトル | 熱処理に伴う炭素鋼の組織変化 | |||||
| タイトル | ||||||
| タイトル | Change of Structure in Carbon Steels by Heat Treatment | |||||
| 言語 | en | |||||
| キーワード | ||||||
| 主題Scheme | Other | |||||
| 主題 | scanning electron microscope | |||||
| キーワード | ||||||
| 主題Scheme | Other | |||||
| 主題 | ferrite-pearlite structure | |||||
| キーワード | ||||||
| 主題Scheme | Other | |||||
| 主題 | spheroidized cementite structure | |||||
| キーワード | ||||||
| 主題Scheme | Other | |||||
| 主題 | recrystarization | |||||
| キーワード | ||||||
| 主題Scheme | Other | |||||
| 主題 | dislocation density | |||||
| キーワード | ||||||
| 主題Scheme | Other | |||||
| 主題 | annealing | |||||
| 資源タイプ | ||||||
| 資源タイプ識別子 | http://purl.org/coar/resource_type/c_6501 | |||||
| 資源タイプ | departmental bulletin paper | |||||
| ID登録 | ||||||
| ID登録 | 10.57375/00000064 | |||||
| ID登録タイプ | JaLC | |||||
| 著者 |
羽木, 秀樹
× 羽木, 秀樹× 吉本, 雅俊× Hagi, Hideki× Yoshimoto, Masatoshi |
|||||
| 抄録 | ||||||
| 内容記述タイプ | Abstract | |||||
| 内容記述 | We examined the change in metallurgical structure of cold-rolled carbon steels by heat-treatment. Specimens were three kinds of carbon steel of S10C, S25C and S50C. After repeating cold-rolling and heat-treatment at 700℃ or 900℃ in the atmosphere, the steel sheets were about 2mm in thickness. The oxide film on the surface was removed by mechanical abrasion, and the steel sheets were heat-treated at 700℃ or 900℃ in a vacuum. The steel sheets were cold-rolled to 0.5mm in thickness, and cut in size of 5mm×20mm. After the heat-treatment at 100-900℃ in a vacuum, The chemical etched surface of the specimens was observed by using scanning electron microscope. And, we measured Vickers hardness and X-ray diffraction pattern for the heat-treated specimens. The change in metallurgical structure of the carbon steel specimens was discussed on the basis of the heat-treatment temperature dependence of the Vickers hardness and the half-value width of the Fe(311) X-ray diffraction peak obtained by analyzing the X-ray diffraction pattern. | |||||
| 書誌情報 |
福井工業大学研究紀要 号 42, p. 110-120, 発行日 2012-08-01 |
|||||
| 出版者 | ||||||
| 出版者 | 福井工業大学 | |||||
| 書誌レコードID | ||||||
| 識別子タイプ | NCID | |||||
| 関連識別子 | TF00008523 | |||||
| 著者版フラグ | ||||||
| 出版タイプ | VoR | |||||
| 出版タイプResource | http://purl.org/coar/version/c_970fb48d4fbd8a85 | |||||
